Car foil sealing glaze sealing precautions

[China Glass Net] The film must be cleaned indoors, and the whole film can not be opened. Before the film is filmed, it is necessary to observe whether there is anti-counterfeit mark on the film. The imported explosion-proof film is equipped with a 6-year guarantee card. The solar film for the front gear is more necessary. It not only improves safety, prevents the glass from shattering and splashes inside the car, but also blocks ultraviolet rays from illuminating the human body and the instrument panel, so that you and your car can get better at the same time. protection of. However, the front windshield film must be a special film for the front block, because the fake film will cause dizziness and dizziness, please be careful to choose.

The precautions for car foil sealing and glazing sealing "sealing glaze" should be illuminated by infrared. The appearance of the car is like the appearance of a person. When the new car is bright and bright, it will be used for a period of time and will become dark and dark. When using a new car, use it. "glaze" wraps the car paint and is isolated from the outside world. It can be washed with water when it is used for maintenance. Now there are too many fake cosmetics for "wax" and "glaze" on the market. We must find a professional car beauty company with infrared special irradiation room. Because of this, it is possible to enhance the "glaze" surface strength and extend the "glaze" endurance.

Sealing and requesting guarantee card It is to spray a high-adhesion, high-elasticity resin on the chassis of the car twice, which greatly reduces the impact of sand and stone impact, and can also achieve anti-corrosion, anti-rust and anti-collision effects. This item can be combined with the "sound insulation project", which not only enhances the grade of your car, but also provides you with a quiet space to improve the sound quality. Don't forget to ask for a longer-term guarantee card from the beauty shop.

Install anti-theft devices as far as possible without changing the line. The cars that are manufactured at the factory basically have anti-theft devices. On the basis of these facilities, you can consider anti-theft devices such as gear locks, and try not to increase or change the original car lines.